Techno Cast Chemicals

Drilling fluids

Explore our advanced drilling additives that enhance drilling fluid performance, reduce friction, and ensure effective and safe drilling operations.

  • Barite Powder – API 13 A Sec 7 (4.20 SG)
  • Barite Powder – API 13 A Sec 20 (4.10 SG)
  • Hematite Powder – API 13 A Sec 8
  • Calcium Carbonate (Marble Grade) – Fine/Medium/Coarse
  • Causticized lignite
  • Ferro Chrome Lignosulfonate
  • Chrome free lignosulfonate
  • Causticized Potassium Lignite
  • Chrome Lignosulphonate
  • Potassium Lignosulphonate
  • Potassium Lignite
  • Sulfonate-based thinner; low flash point may limit use for some areas
  • Chrome free lignosulfonate thinner/deflocculant
  • Phosphate-based thinner/dispersant
  • Liquid acrylate-type polymer for use up to 450°F
  • Drilling Starch (Without Preservative)
  • Drilling Starch API 13A Sec 16
  • PAC LV API – 13A Sec 17
  • PAC HV API – 13A Sec 18
  • CMC LVT – API 13A Sec 14
  • CMC HVT – API 13A Sec 15
  • PAC LV TECH
  • PAC R TECH
  • Carboxy Methyl Starch
  • Resinated Lignite
  • Gilsonite
  • It applied below temperature of 180℃ (356℉, BHCT)
  • H2S Scavenger – It is used to remove H2S from liquid and gas phases of completion, packer, and workover fluids.
  • Concentrated Corrosion Inhibitor – For closed brine systems.
  • Biocide – Quaternary ammonium-based biocide which acts as a powerful biocide in oilfield drilling and water treatment.
  • Biocide – Glut based.
  • Biocide – Triazine-based product used as a bactericide in drilling, completion, or workover and packer fluids.
  • Biocide – Organophosphorus based.
  • Corrosion Inhibitor – Completion brines – Protection to be 90% minimum or ≤1.0 MPY corrosion rate.
  • An Oil Soluble Corrosion Inhibitor. A multi-purpose corrosion inhibitor for most water-based systems and completion fluids.
  • Dry powder sulfite-based oxygen scavenger suitable for monovalent brines and water-based drilling fluids.
  • Nitrogen-based filming amine corrosion inhibitor suitable for mono- and divalent brines.
  • Amine-based water-soluble corrosion inhibitor for mono- and divalent brines.
  • Hematite Powder – API 13 A Sec 8.
  • Calcium Carbonate (Marble Grade) – Fine/Medium/Coarse.
  • Defoamer – Alcohol Based.
  • Defoamer – Silicone Based.
  • Defoamer – Divalent Brine – 70% foam height to be eliminated in ≤ 60 seconds.
  • Defoamer – Monovalent Brine – 80% foam height to be eliminated in ≤ 60 seconds.
  • Defoamer for high performance WBM system.
  • Petroleum hydrocarbon-free defoamer for water-based fluids.
  • Alcohol-based anti-foaming effective defoamer for fresh-water or sea-water drilling fluids.
  • Glycol-based anti-foaming effective defoamer for brine and high-salinity drilling fluid.
  • Oil-soluble defoamer dispersible in most brines. Compatible with most fluid types, including zinc brines.
  • Surfactant – A nonionic water-based surfactant used to reduce both surface and interfacial tension.
  • Foaming Agent – Surfactant.
  • It is a mixture of surfactants. It is employed to alter the properties of the liquid accumulates in wells by reducing the density of liquid or residue.
  • Mutual Solvent.
  • Surfactant – Cationic Surfactant. Spotting Fluid (Pipe Free Agent) – “Develop visible cracking in both filter and mud cake.”
  • Drag Reducing Agent – A hydrocarbons miscible drag reducing agent.
  • EP Lubricant – Ester based effective lubricant for water-based systems.
  • EP Lubricant – Water based – Torque Reduction – Minimum 75%. It reduces torque and drag issues by providing lubricity to water-based drilling operations without compromising or damaging production zones.
  • EP Lubricant – Oil Base – Torque Reduction – Minimum 85%.
  • An emulsion type lubricant.
  • ROP Enhancer – A highly effective ROP enhancer for highly reactive shale.
  • Friction Reducer – Anionic high molecular weight polymer.
 
  • Bentonite Powder API – 13 A Sec 9
  • Non-Treated Bentonite API – 13 A Sec 10
  • Pure high-viscosity HEC suspended in an ultra-clean mineral oil.
  • Bentonite OCMA Grade API – 13 A Sec 11
  • Attapulgite API – 13 A Sec 12
  • Guar Gum
  • Xanthan Gum API – 13 A Sec 19
  • Hydroxy Ethyl Cellulose
  • Organophilic Clay
  • PHPA liquid – Active Content – Above 35%
  • Xanthan gum suspended in an ultra-clean mineral oil.
  • Carboxymethyl hydroxyethyl cellulose
  • Carboxymethyl hydroxypropyl guar
  • SALT GEL is a hydrous, magnesium silicate clay (attapulgite) that is utilized in water-based drilling fluids where the salinity exceeds 35,000 mg/L.
  • Cloud point Glycol – Medium Cloud Point (5% in 10% NaCl Solution) – 48 – 75 °C.
  • Cloud point Glycol – Medium Cloud Point (3% in 10% NaCl Solution) – 48 – 75 °C.
  • Cloud point Glycol – Medium Cloud Point (3% in 10% KCl Solution) – 48 – 75 °C.
  • Cloud point Glycol – Medium Cloud Point (6% in 10% KCl Solution) – 48 – 75 °C.
  • Cloud point Glycol – High Cloud Point (5% in 10% NaCl Solution) – Above 75°C.
  • Cloud point Glycol – Low Cloud Point (5% in 10% NaCl Solution) – Below 48 °C.
  • Polyglycol – High cloud point poly glycol designed for high salinity poly glycol systems used to stabilize dispersible shale.
  • Barite Powder – API 13 A Sec 7 (4.20 SG).
  • A fluid loss additive for use in drilling fluids made from blended gilsonite.
  • PHPA Powder.
  • Sulfonated Asphalt.
  • Sulfonated Asphalt Supreme.
  • Shale Inhibitor – Polyamine shale suppressant that is employed in inhibitive water-based drilling fluids to prevent the swelling of clay, for medium reactive clay.
  • Shale inhibitor – An effective inhibition of shale or gumbo clays, for highly reactive clay.
  • An organic multivalent clay inhibitor in polymer-based drilling, workover, and completion fluids.
  • A glycol-based dehydration inhibitor used for corrosion protection and buffering of gas dehydration systems.
  • Iron control Agent – Liquid.
  • Iron control agent – Solid.
  • Iron chelating agent – Solid.
  • Iron Stabilizer – Solid.
  • High Temperature Stabilizer – It effectively stabilizes frac gels used in high temperature operations.
  • Scale inhibitor used to prevent scaling formation, widely used in desalination plants.
  • Scale inhibitor – It can dissolve the oxidized materials on these metal surfaces. It is excellent scale and corrosion inhibition.
  • Calcium Bromide Brine – Active Content – Above 52%
  • Soda Ash
  • Sodium bicarbonate
  • Potassium Chloride
  • Sodium Hydroxide
  • Citric Acid
  • Calcium chloride
  • Sodium Chloride
  • Magnesium Oxide
  • Lime Hydrated
  • Calcium Bromide
  • Phosphoric acid
  • Primary Emulsifier – Produces stable emulsions which are resistant to temperatures and contamination. Stable up to temperatures 204 °C. Secondary Emulsifier – Improves thermal stability, rheological stability, filtration control, and emulsion stability. Stable up to temperatures above 204 °C.
  • Wetting Agent – A powerful oil wetting agent used in oil wet drill solids in oil-based drilling fluids. Rheology Modifier – An organic gelling agent used in oil-base mud systems. It increases low-shear-rate viscosities (LSRV) and gel strengths for improved hole-cleaning.
  • OBM Thinner – A dispersant and surfactant for diesel oil, mineral oil, and synthetic oil-based muds. It reduces viscosity and gel strength without the need for dilution. A viscosifier and gelling agent used in oil-base mud systems in combination with primary emulsifier and secondary emulsifier.
  • Filtration loss control additives for OBM Muds.

  • TC TEMP effectively stabilizes frac gels used in high-temperature operations and provides polymer fluids suitable for high-temperature wells.

  • TC TEMP 200 results in significant improvements by binding with remaining traces of oxygen and metal ions present in the solution.

  • TC MICA: Mica – Fine/Medium/Coarse grades.
  • TC CELLU: Cellulose Fiber – Fine/Medium/Coarse grades.
  • TC NUT: Walnut Shell – Fine/Medium/Coarse grades.
  • TC QSEAL: Quick Seal – Fine/Medium/Coarse grades.
  • TC GRAP: Graphite Powder.
  • TC SCARB: Sized Calcium Carbonate.
  • TC CCARB: Calcium Carbonate – Fine/Medium/Coarse grades.
  • TC PAM: Polyacrylamide.
  • Drilling Detergent – A special aqueous blend of surfactants equally effective regardless of makeup water, whether it is fresh or saturated salt water.
  • Mud Detergent – It is environmentally friendly water-soluble mud detergent and lubricant designed to reduce torque & drag.
  • Rig Wash – A cost-effective surfactant used for surface cleaning applications. It is designed to reduce the surface tension of all water base mud sys